Testing Standard of Thermal Cycling Tester
Thermal Cycling Chamber Information
|
Inner size
|
W40*H40*D45cm
|
|
Machine size
|
W65*H92*D53cm
|
|
Temp range
|
RT~200℃
|
|
Temp display accuracy
|
0.1℃
|
|
Temp stability
|
±1.0℃
|
|
Temp uniformity
|
±2℃
|
|
Heating time
|
（5±2）℃／min,(average)
|
|
Temp controller
|
Programmable controller
|
|
Inner material
|
SUS#304
|
|
External material
|
Steel with sprayed coating
|
|
Insulation material
|
high-efficiency compressed glass wool
|
|
Heat preservation device
|
non-fuse breaker, over temperature protection switch, fuse
|
|
Power
|
220V/380V/customized
|
|
Safety device
|
Sub-over temperature alarm, MCCB overload protection, etc
|
|
Exhaust flue
|
vane-type design with adjustable air volume
|
|
Air supply circulation system
|
convection air supply circulation system
|
|
Control system
|
temperature to timing, time to stop, buzzer prompts
|
|
Control method
|
When the temperature of the battery thermal shock test chamber reaches the set temperature, the time meter is automatically opened, the heating power supply is cut off after the time reaches, and the buzzer prompts
|
Features of Battery Thermal Cycling Teasting Chamber
◆Adopt a touch screen controller, high-end atmosphere, and powerful functions. You can choose single-point temperature control or program temperature control mode.
◆Castors are installed at the bottom. You can move the equipment according to the placement position.
◆Adopt PT100 thermal resistance temperature sensor, high precision, high-temperature resistance, fast temperature sensing, and low maintenance.
◆Users can meet the laboratory’s special requirements according to the processing type of the inner and outer chamber walls.
◆The equipment’s outer box is made of cold-rolled steel plates, sprayed with paint. It has a perfect structure and is corrosion—and high-temperature-resistant.
◆The equipment’s inner box is made of a 304# mirror panel, which has a smooth surface that is easy to clean, is corrosion—and high-temperature-resistant, and allows for more convenient maintenance.
◆We can customize any specifications and sizes to ensure that there is no waste of space.
Test requirements
After the battery is fully charged according to the specified test method, place it in the test chamber. The chamber will maintain a heating rate of (5±2)℃/minute. When the temperature in the chamber reaches 130℃±2℃, maintain this temperature for 30 minutes. The battery should not catch fire or explode.
