High Altitude Test Chamber

This altitude testing chamber is used for high-altitude, low-pressure simulation tests. Put the test piece into the low-voltage box. Adjust the pressure of the test chamber to 11.6kPa (1.68psi), the temperature to room temperature, let it stand for 6 hours, and observe for 1 hour.

The equipment can automatically control the test cycle (such as 6H). The pressure change in the box is monitored throughout the process. Automatically maintain the constant pressure in the box to realize the automatic termination of the test.

Description

Product Specification

Digital display vacuum degree control table:	Pressure range 1-60kPa adjustable, commonly used 11.6kPa
Inside size of the box:	W400H400D400mm
Outside size of the box:	800670910 (WHD) mm
Shelf	Two pieces of insulating material shelf
Outer box material:	Steel plate lacquer treatment
Inner box material:	stainless steel
Various takeover:	Special steel materials
Clapboard:	304 stainless steel frame
Pressure range:	1~60KPA
Pressure fluctuations:	≤5%
Pressure to save time:	26h reduce 5%
Equipment power:	AC380V 60Hz,5A / 220 V sigle phase 60 Hz

The air volume in and out can be controlled automatically. Air pressure constant automatic control door sealing. This altitude test chamber is resistant to high temperatures. The door has a tempered glass observation window. The user can observe the situation inside the box.

Test Standard

UN38.3,UL1642,UL2054,GB 8897.4-2002,IEC60086-4 ,GB31241,SN/T1414, SN/T1413 , YD1628, GJB2374, QB/T2052,IEC62133-2012, SAE-J2464,GB31241,IEC62133-2012 ,IEC 62281: 2006 ,IEC 60086: 2007 ,IEC 61960

Use Condition

Avoid sunlight shine directly or high temperature and wet.
Place on smooth ground.
The power supply is a three-phase, five-wire power supply that can be ground.
Please make sure that the environment temperature is 20±5 degrees when using. It can ensure the casing test temperature.

English