- Carton box
- Corrugated case
|Model XB-OTS-220B||Drop Impact Tester|
|Plate thickness||10 mm|
|Deviation of dropping horizon||< 1°|
|Dropping deviation||< ±10 mm|
|Test height(mm)||300mm~1500 mm|
|Test space||870*740*400~1600mm (W*D*H)|
|Max. specimen weight||0~60 KG|
|Base plate size||1200*1400mm|
|Single Arm size||300*750mm|
|Control method||By electronic controller box|
|Dropping method||Pneumatic cylinder|
|Height display||LCD reads drop height|
|Height adjustment||Servo motor controlling precision guiding|
|Buffer type||Oil pressure absorbability|
|Power||AC220V 50/60Hz 1 Phase|
|**Design Criteria : ISTA-1A ISO 2248, JIS Z0202-87, GB/T4857.5-92|
* NOTE: All kinds of fixtures and elongation measurement devices, and other accessories can be equipped depending on the client’s demand. Our company would give clients the most appropriate advice.
- A precision grinding shaft lever, high precision, and good stability use the spindle.
- LCD screen displays multi-parameter.
- Power failure safety design keeps the original state when the power fails.
- Up and down lifting limitation set.
- The drop tester adopts a single-arm supports test object.
- The swing arm system is controlled by air pressure.
- Free adjust pressure and speed up to 2G with object weight.
- Test electronic parts, finished products, or the angled surface of the package container.
- Decompression change design, low noise.
- Best after-sales service: One year of free parts maintenance.
- Meet international test standards.
- Customization is available & welcomed.