Product Specification
| MODEL | XB-OTS-90 | XB-OTS-120 | XB-OTS-160 | XB-OTS-200 | |
|---|---|---|---|---|---|
| Interior Test Chamber Dimension(cm)(L×W×H) |
90×50×60 | 120×80×50 | 160×100×50 | 200×100×50 | |
| Exterior Test Chamber Dimension(cm)(L×W×H) | 141*145*140 | 190*165*140 | 200*190*140 | 240*200*140 | |
| Capacity of the chamber(L) | 270L | 480L | 800L | 1000L | |
| Temperature&humidity of the operating environment | +5°C~ +35°C / <85%RH | ||||
| Air pressure | 86~ 106Kpa | ||||
| Lab. temperature | NSS ACSS 35°C±1°C | ||||
| CASS 50°C±1°C | |||||
| Pressure barrel temperature | NSS ACSS 47°C±1°C | ||||
| CASS 63°C±1°C | |||||
| Temperature&humidity Control Accuracy |
Test room temperature range: +0℃～+85℃ | Relative humidity: 20%～98%RH(±3%) | |||
| Saturated barrel temperature: 47℃～70℃ | Temperature/humidity uniformity: ≤±2℃ ≤±3% | ||||
| Temperature resolution: 0.01 ℃ | Humidity Resolution: 0.1% RH | ||||
| Temperature fluctuation: ± 0.5 ℃ | Humidity fluctuation: ± 2% RH | ||||
Salt Fog Test Chamber Features
- The automatic/manual water system automatically adds the water level. If the water level is low, the test is not interrupted. The water level is an insufficient warning to ensure the use of safety.
- Precision glass nozzle (PYREX) made of special glass, mist spread evenly and naturally falls on the specimen. The salt spray test equipment can be used continuously for 4000 hours to ensure no crystallization salt blockage.
- Inlet temperature controller using a digital display, PID control, error of ± 0.1 ° C.
- The salt spray chamber uses direct steam heating, heating up fast and reducing standby time. Heating tubes have highly corrosion-resistant titanium tubing.
- Laboratory basket rack using a plane indexing rack can arbitrarily adjust the angle. Four off the fog, and the direction is completely consistent.
Salt Fog Test Chamber Applications
- Metal Parts
- Electronics
- Car Spare Parts
- Building Materials
- Automotive parts
- Aviation equipment
- Photographic equipment
